With the help of the reposition-reexamination process, the correctness of all three simulated cases for AF nanowires was validated. Figure 6a, b, c shows the results from the same nanowire. As shown in panels a and b, the projected preferred growth directions labeled as yellow lines are perpendicular to the lines tying the 010 and diffraction spots. These experimental results agree with the simulated ‘AF case 1’ and ‘AF case 2’ shown in Figure 4 and Table 1, indicating that this nanowire is an AF nanowire. After reposition, the characteristic selleck inhibitor features of planar defects are clearly revealed in Figure 6c to confirm that

this nanowire is an AF one. Figure 6d, e shows the experimental results of another nanowire, which confirm the correctness of ‘AF case 3’. Figure 6 Experimental validation of the three simulated AF cases. TEM results of a nanowire whose planar defects are invisible from both (a) [001] and (b) zone axes. The analyzed diffraction Crizotinib clinical trial patterns agree with the simulated ‘AF case 1’ and ‘AF case 2’, indicating that the nanowire is an AF one. (c) After the reposition-reexamination process, planar defects are revealed and the nanowire is confirmed to have axial faults. TEM results of another nanowire (d, e), which confirm the correctness of ‘AF case 3’. Summary In brief, an approach to identify the fault

orientation of a nanowire based on TEM results from the off-zone condition was developed. The key of this approach is to analyze the geometrical relation between the projected preferred growth direction of a nanowire and certain diffraction spots from its diffraction patterns recorded along the off-zone directions. Comparison with experimental data shows that this approach correctly identifies

the fault orientation in a boron carbide nanowire without going through the tedious reposition-reexamination buy Verteporfin process. Knowing the fault orientation of each nanowire could help us to establish reliable structure–property relations of boron carbide nanowires. Conclusions In summary, a thorough discussion on the observation of planar defects in boron carbide nanowires is presented. There are two major findings. (1) Planar defects can easily become invisible during TEM examination, in which case, observation along different zone axes is a must when studying the nature of planar defects. A roadmap based on simulated diffraction patterns along several low index zone axes parallel to planar defects is constructed to facilitate the practical TEM examination. (2) An approach has been developed to determine the fault orientation (i.e., transverse faults or axial faults) within a nanowire even if the planar defects are not revealed by TEM, which could facilitate further examination of the nanowire and help to establish the structure–property relations.