9 mg, 0.125 mmol), 2,2′-bipyridyl (39.4 mg, 0.25 mmol) and TEMPO (19.9 mg, 0.125 mmol). The Cu(bpy)2 was obtained after one month. The crystal structure was confirmed by X-ray crystallography. The yield for Cu(bpy)2 was 28.2 mg (45.2%). IR (KBr): ν (cm− 1) = 3048(w), 1600(m), 1567(w), 1497(m), 1475(m), 1443(m), 1335(s), 1293(s), 1163(m), 1103(w), 1061(w), 1030(s), 771(s), 729(s), 663(s), 640(s). Anal. Calcd. for C20H16CuN6O6 (499.92), 1: C, 48.05; H, 3.23; N, 16.81. Found: C, 48.01; H, 3.42; N, 16.57%. The appropriate amount of ascorbic acid and the

metal complexes were added to the scDNA solution in a 5 mM cacodylate buffer (pH 7.0) for the conventional cleavage experiment. The final concentration of scDNA was 200 ng/12 μL. The mixture was incubated for 15 min at Selleck MK0683 room temperature. The reaction was quenched by

the addition of stopping buffer containing 7 mM EDTA, 0.15% bromophenol blue, 0.15% xylene cyanol and 75% glycerol. The mixtures were placed on a 1% agarose gel and electrophoresed at 25 V, 400 mA for 200 min. The gel was stained with tris-acetate-EDTA(TAE) buffer containing 0.5 μg/mL ethidium bromide, 20 mM tris acetate and 1 mM EDTA and visualized by UV trans-illumination. Electrochemical experiments were conducted using a three-electrode one-compartment cell on a potentiostat (CH Instruments, Model 630C). The electrochemical MAPK Inhibitor Library cost measurements were performed using an Ag/AgCl reference electrode, coiled platinum counter electrode and glassy carbon electrode (Bioanalytical Systems Inc., A = 0.071 cm2). Cyclic voltammetry was performed over a potential range of 0.3 and − 0.8 V (vs. Ag/AgCl) with a scan rate of 0.1 V/s. Square wave voltammograms (SWV) were registered in the potential interval 0.3 to − 1.0 V (vs. Ag/AgCl), under the following conditions: potential increment, 5 mV; pulse frequency, 15 Hz which was optimized in relation with the peak

definition. The absorption spectra were recorded on a Cary 100. A BIO 3-mercaptopyruvate sulfurtransferase RAD FTS 135 spectrometer was used to examine the IR KBr pellets. The X-ray diffraction pattern of all three compounds were obtained on a Bruker SMART APX diffractometer equipped with a monochromater in a Mo Kα (λ = 0.71073 Å) incident beam. LD is defined by the difference in the absorption of polarized parallel and perpendicular radiation relative to the laboratory reference axis of the oriented sample. The usage of LD measurements as a tool for detecting dsDNA cleavage in real-time is described elsewhere [20] and [21]. The time-dependent decrease in LD at 260 nm and the LD spectrum were recorded on either a J-715 or J-810 spectropolarimeter (Jasco, Tokyo, Japan) equipped with an inner rotating flow cell. The result was fitted to one and two exponential decay curves using the OriginPro 8.0 program (OriginLab Co., Northampton, MA, USA). The goodness of fit was evaluated using the residuals. Fig.