We then immersed them in

an intermediate solvent (propylene oxide; Nisshin EM) for 10 min and in a mixture (1 : 1 v/v) of propylene oxide and Spurr’s resin (Spurr, 1969; Polysciences, Warrington, PA) for 6 h at room temperature. We then placed the samples in pure Spurr’s resin at 4 °C for 3 days. The specimens were then embedded in resupinated gelatin capsules (Nisshin EM) and polymerized at 70 °C for 24 h. To observe the cellular reactions at contact sites between hyphae, we cut the blocks parallel to the contact regions with a microtome blade (Feather Safety Razor, Gifu, Japan) under the stereomicroscope. The blocks were then cut with a Porter-Blum MT-1 ultramicrotome (Ivan Sorvall, Norwalk, CT) and a diamond knife (Diatome, Bienne, Switzerland). We prepared ultrathin sections (c. 80 nm thick). Copper grids (Thin Bar grid, Gilder, Grantham, UK) were coated with 2% collodion in isoamyl Protein Tyrosine Kinase inhibitor acetate (Nisshin EM) 30 min before use. Sections were stained

with 4% aqueous uranyl acetate for 10 min and then with modified Sato’s lead solution (Sato, 1968) at room temperature for 10 min. Every staining step was followed by washing with distilled water. The stained sections were observed with an electron microscope (H7100, Hitachi, Ibaraki, Japan) at an accelerating voltage of 75 kV. When we www.selleckchem.com/btk.html noticed that some cell structures had collapsed at the hyphal contact zones, we rated the parts of the cell contents that had collapsed in each interaction zone. Proportions of the Paclitaxel ic50 collapsed cell components were calculated using observations of 50 hyphal contact zones. Mycelia

were grown in 1/10-strength oatmeal liquid medium (2.6 g L−1 oatmeal, 5 g L−1 sucrose) for 1 week. The mycelial mass was cut into small pieces using a homogenizer (Nihon Seiki Kaisha Ltd, Tokyo) at 10 000 r.p.m. for 5 s. The homogenized mycelia were mixed in compatible and incompatible combinations and spread on cellulose membranes laid on oatmeal agar plates. Cellulose membranes with attached mycelia were stripped from the plates after 5 and 8 days inoculation, ground to a fine power in liquid nitrogen, and then dissolved in DNA isolation buffer (10 mM Tris-HCl pH 7.5, 100 mM LiCl, 100 mM EDTA, 0.5% w/v SDS). After incubation of the solutions at 60 °C for 30 min, we precipitated the mycelial debris by centrifugation at 10 000 g for 10 min at 4 °C. The total nucleic acids were extracted with an equal volume of phenol : chloroform : isoamyl alcohol (PCI; 25 : 24 : 1 v/v) and precipitated with an equal volume of isopropanol by centrifugation at 10 000 g at 4 °C for 15 min. Total nucleic acids were resuspended in 100 μL TE (10 mM Tris-HCl pH 8.0, 1 mM EDTA) and were electrophoresed on 1.0% agarose gel in TAE buffer (40 mM Tris-acetate pH 8.0, 1 mM EDTA) to confirm the quality of the total nucleic acids.